home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
FINACIAL
/
REALANAL.LZH
/
READ.ME
< prev
next >
Wrap
Text File
|
1992-08-24
|
4KB
|
100 lines
REAL-EASY
PROPERTY ANALYSIS
(C) Copyright 1992
Jon F. Reynolds
Computer Specialties
3913 Heritage Hill
San Antonio, Texas 78247
----------------------
**********************
----------------------
Real-Easy Property Analysis is the most comprehensive and affordable
real estate property analysis program available on the market. Since
it is much larger than will fit onto a 360k 5.25 inch floppy disk,
it is in compressed form, employing the (c)LHARC data compression
utility.
Before decompressing the files, you should make a copy of the
diskette for backup purposes. To decompress the files, simply copy
the files from the Realeasy distribution diskette to the drive where
the program is going to reside. This is usually to a hard drive, although
it is possible to decompress the files onto either a 720k or larger 3.5 inch floppy drive or 1.2 meg
or larger 5.25 inch floppy drive.
----------------------
**HARD DRIVE SYSTEMS**
----------------------
On a hard drive system, make certain you are at the system prompt
and create a directory for the Realeasy program files by typing:
c:\md Realeasy
Then, change to the Realeasy directory by typing:
c:\cd c:\Realeasy
Place the program distribution diskette into your A:\ drive and type:
c:\Realeasy\copy a:\*.* c:
From the directory prompt issue the command to run the decompression
program:
c:\Realeasy\program
----------------------
*FLOPPY DRIVE SYSTEMS*
----------------------
When decompressing the program files on a floppy based system, simply
copy the files from the Realeasy program diskette onto the floppy drive
to which it is to be decompressed. For example, if the A:\ drive is the
360k drive containing the program diskette, place a blank formatted floppy
diskette into the B:\ drive and, at the A:\ prompt type:
a:\copy *.* b:\
When the files are finished copying, change to the B:\ drive and issue
the command to run the decompression program:
b:\program
-----------------------
**RUNNING THE PROGRAM**
-----------------------
Once the files are decompressed, there will be three program files on the
drive: Realeasy.bat, Realeasy.skw, and Run.exe. The compressed program
file, program.exe, should be deleted to conserve disk space by issuing the
command:
c:\Realeasy\del program.exe
If you are running the program from a drive other than c:\, substitute
the proper drive letter in the above commands from the directory in which
the program files reside. For example, if you are running from a floppy
disk in the B:\ drive with no directories, simply type:
b:\del program.exe
Once the program has been decompressed and installed on your computer
it is started by typing: Realeasy from the directory prompt. Example:
c:\Realeasy\Realeasy
or
b:\Realeasy
The opening screen of Real-Easy Property Analysis is the documentation
section. Not only will it supply line by line explanations of the program's
analysis, but also contains important information for data input, context
sensitive help, and registration of Real-Easy Property Analysis.